POINT-TO-POINT CHECK ON NIGHT-PATROL STAFF
AKA TELL-TALE NIGHT WATCHMAN CLOCKS
EXCLUSIVE FEATURES
- All patrol points must be visited to complete the record . . .
- Recording clock never seen by patrol . . .
- Tampering with either clock or record is there fore impossible . . .
- One clock can check up to 100 points …
- Clock can be either electric impulse or 8-day mechanical
TELLS AT A GLANCE
- Tells at a glance
- All patrol points visited
- Exact time of visits
- All points not visited
Hospitals, mental homes, prisons and similar; one of the problems which had to be overcome efficiently and regularly. It was to solve this problem that the Gents’ Tellgrave increase in “breaking and entering” and risk undertakings have also found it wise to maintain. Here, again, the same problem arises. How can the patrol laid down? The complete answer will be:
THE SYSTEM
Electrical Contacts, operated by means of a key, are installed about the Establishment at the particular points night duty staff are required to visit. Each of these contact boxes is connected back to a Recording Clock by a simple wiring System.
The night watchman, nurse, or other person carrying out the night patrol, carries one key only which fits all boxes in the establishment. To complete the record chart, all patrol points must actually be visited and the contact boxes operated by use of the key.
The clock itself need never be approached and may, if desired, be in some place inaccessible to the patrol staff.
At the end of the patrol period, a complete charted record of the points visited, and the times they were visited, is available for examination and investigation of any default.
THE CLOCK
This is of the highest quality, in an attractive polished hardwood case of modern design.
Where an Electric Impulse System of Clocks is already in existence the recording clock can be fitted with an Electric Impulse movement and incorporated in this system.
Where a mechanical clock is required, a best type English 8-day pendulum movement is fitted.
RECORDING MECHANISM
The recording mechanism consists of a series of markers (one for each contact box) associated with a chart carried on a vertical drum. The drum is driven by the clock mechanism and can be arranged to take charts covering 12, 24, 48 or 72 hour periods.
WIRING
WIRING
Sketch below shows the simplicity of the wiring. One lead from each contact box is led back to the Clock and a common feed, linking in each contact, connected to the supply. The other supply lead goes direct to the Clock.
MODELS AVAILABLE
Two main types are available. The single chart barrel type as illustrated on the front gage of this leaflet is made to accommodate either 10, 20, 30 or 40 points.
Twin Chart-barrel type is supplied to check either 60, 80 or 100 points.
Reference Numbers:—
Single Barrel type, Fig. 4770
Twin Barrel type, Fig. 4771

CONTACT BOXES AND KEYS
Institutions have long employed patrolling night staff and was to make sure that the patrols were carried out. The Clock was first evolved but, of recent years, with rising premiums for insurance against fire, many industrial areas have night patrol. You can be sure that the night watchman is maintaining the rounds in the system described below.
Thus, the closing of the circuit by the operation of a contact box causes the chart to be marked, and the position of the mark shows the location of the box and the exact time it was operated. The marking agent is a dry-ink ribbon inserted between the markers and chart. This is moved on automatically every time the chart is changed, ensuring a clear and clean record for each ensuing period.

FIGS. 4786 and 4791
Figs. 4786 and 4791 on the right are similar in operation. They are both fitted with substantial contact springs, which are closed when key is turned.
Fig. 4786 is fitted in a rectangular cast metal case with bronzed front-plate. This type can be supplied for surface or flush fixing with J ” conduit entry at top or bottom.

FIG. 479
Fig. 479 is suitable for surface fixing only. Case is of cast metal with front secured by triangular headscrews.
Specially suitable for industrial installations. Tapped conduit at bottom.

FIG. 4785
Fig. 4785 is push-button operated, the push being contained in a polished hardwood cabinet with hinged front fitted with a lock and key. This type was devised primarily for mental homes, schools and places where contact boxes may be subject to interference by irresponsible persons.
POWER SUPPLY
As described above, the Clock Movement can be either Electric Impulse or mechanical. The recording mechanism is operated electrically by means of a battery or trickle charged accumulators. If A.C. Mains supply is available during the period of patrol, a transformer giving 24 volts 50 cycles may be used.

Products in circulation today